Software of the Month Club 1998 March/Software of the Month Club 1998 March.iso/pc/dos/edu/create/creainfo.txt

Text File | 1997-11-19 | 17KB | 321 lines

                     C R E A T I V I T Y   P A C K A G E
                        G E T T I N G   S T A R T E D
               ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   QUICK START:
   To run "Thunder Thought" from a DOS prompt, enter: THUNDER
   To run "Versifier" enter: VERSE
   To read the "Think Thunder" book enter: READIT
   To read the on-disk manual, enter: CREATDOC

   REVIEWERS: If you intend to review this software for publication, please
contact us to make sure you have the most recent version and that the
ordering information supplied to your readers will be accurate. We would
appreciate receiving a tearsheet or copy of any published reviews. Thank
you!

   ALWAYS MAKE A BACKUP COPY of the original disk before you do anything.
(See the DISKCOPY command in your DOS manual.) Put the original in a safe
place, and use the copy as the master disk when you install the program.
   Note that in all of the following examples, if your drive letters or
directory names are different, you can simply use the same command, but
with your actual drive letter and directory name. For example, we refer to
the floppy drives as drive A and drive B. If yours are really called drive
D and drive E, then use D and E instead of A and B. In our hard disk
example, the subdirectory is called CREATE. But you can name it something
else. For example, if you name it WEST, just use WEST in the command
instead of CREATE.
   The following instructions assume the files on your disk are NOT
archived. If you have received the files in archived format, refer to the
installation instructions that came with your disk.

   INSTALLING TO A HARD DISK: The first thing you need to do is create a
subdirectory on the hard disk. (If the subdirectory has already been
created, you don't have to create it now.) For example, if you decide to
name the subdirectory CREATE, you would start at your C> prompt, and use
the
following sequence of commands:

   CD\
   MD CREATE
   CD \CREATE

Now put the master disk in the A drive and enter this command:

   COPY A:*.*

You should see all the files being copied. When the copying is finished,
you are ready to run the program.

   INSTALLING TO A FLOPPY DISK WHEN YOU HAVE TWO FLOPPY DRIVES: Put the
master disk in drive A. Put a new, formatted disk in drive B. Enter this
command:

   COPY A:*.* B:

   You should see the files being copied to the disk in the B drive. When
all the files have been copied, the B disk is your working disk. You can
move  the B disk to the A drive and use it there if you prefer.
   For greatest efficiency and maximum storage capacity, we urge you to
install the software to your hard disk.

   INSTALLING TO A FLOPPY DISK WHEN YOU HAVE ONE FLOPPY DRIVE: Put the
master disk in drive A. Have a new disk ready. Enter this command:

   DISKCOPY A: B:

   The computer will display messages telling you when to put the "source
disk" or the "target disk" into the drive. The "source disk" is your master
disk. The "target disk" is your new disk. When all the files have been
copied, the "target" disk is your working disk.
   For greatest efficiency and maximum storage capacity, we urge you to
install the software to your hard disk.

   NEED MORE SPACE? If you are running programs on floppy disks you may not
have enough disk space for the data files created by the program. You can
remove the documentation files, which the program does not need, from your
working disk. However, these files contain important information which you
will need for reference, so do not delete them from your master disk. To
delete the documentation files, put the working disk in the A drive and
enter these commands:

   DEL A:*.TXT
   DEL A:*.DOC

   The documentation files must be included with copies of the program that
are distributed to others.

   PROGRAM FILES: Program files can be identified by the extension EXE or
COM after the file name. To run the program, simply type its name. For
example, if you have a program named CREATE.EXE, type CREATE and press
<ENTER>.

   DOCUMENTATION AND INSTRUCTIONS: The on-disk manual appears in an
executable file named CREATDOC.EXE. To view the manual from the DOS prompt,
type CREATDOC and press <ENTER>. You can page through the document on
screen, or print it by pressing <ALT><P>. For  a list of helpful commands,
press <F1>.
   All features of CREATIVITY PACKAGE are documented in the on-disk manual.
To
save disk space, this manual may not contain all the extra explanatory
material and examples which are included in the printed manual provided to
registered (paid) users. The printed manual also includes a table of
contents
and index.
   Files which have the DOC or TXT extension are ASCII format files (also
called DOS Text files) which can be viewed or printed using DOS commands.
For example, if you have a typical setup, you can print a document called
CREAINFO.TXT using this command:  TYPE CREAINFO.TXT > PRN
   To view this file on screen, you would enter: TYPE CREAINFO.TXT | MORE
(Successful use of MORE assumes that the correct DOS files are in your
path. If this is not the case, you can simply use TYPE CREAINFO.TXT, but
the
file may scroll up out of view.)
   You can also view and print this kind of file with text viewing
utilities, and with most word processors, using "ASCII", "DOS Text" or
"Non-document" format.

   CHANGES AND UPDATES: Sometimes changes are made in a program after the
manual is completed. Information about such changes will appear on disk in
a text file called UPDATE.TXT. If this file appears on your disk, you
should read it to get the latest important information about the software.

   NEW VERSIONS: Sometimes a new version of a program will ask permission
to update your data files. Do not answer "yes" unless you have already made
a backup copy of your data. Don't copy the backed-up data back into the
directory after the files have been updated. This backup is simply
insurance against data damage or loss. You should make backups regularly.

   BE SMART!  Before installing new versions of any software, make backups
of all the old files. This protects you in case of an error during the
installation/update process. Remember that power surges, hardware failure,
and user errors can all lead to data loss or damage. Make backups of your
data on a regular basis. If you wonder how often you need to back up your
word processing documents, mailing lists, spreadsheets, etc., ask yourself,
"How many days worth of work can I afford to lose?" We recommend that you
use a system of three or more sets of backup disks which you rotate on a
daily basis. That way, if something unfortunate happens to one set of
backups, you will have another set available. A few minutes spent making
daily backups can save you hours of heartbreaking work trying to recreate
lost data.

   BAD DISK? It seems that in hot weather we sometimes get complaints about
"bad" or unreadable disks. Floppy disks are susceptible to heat, moisture
and magnetism. A disk that sits all day in a hot mailbox or truck where
temperatures exceed 100 degrees is likely to be damaged. Disks which have
been exposed to magnetism may become unreadable.
   Before assuming a disk is bad, try it on another computer. It may be
that your computer's drive heads are dirty or slightly misaligned. Suspect
this if you often get disk error messages with different disks. An
inexpensive head cleaning kit may help solve the problem.
   With 5.25" disks, sometimes the round disk gets trapped inside its
square  casing and generates an error because it can't rotate freely.
Remove the  disk from the drive and tap each of the four edges sharply on
the surface  of your desk. This may loosen the disk. Try reading the disk
again.
   With 3.5" disks, the sliding plate may not be sliding open when the disk
is placed inside the drive. Gently slide the plate back and forth until it
feels looser, being careful not to touch the disk media inside. Try reading
the disk again. If the plate will not slide, or it it appears to be bent,
do not place it inside the drive. Instead, you can simply remove the plate,
which protects the disk but is not required for us.
   Several popular utility packages have features that can sometimes
revive unreadable disks.
   In any case, if we sent you an unreadable disk, we will be happy to
replace it with a fresh copy of the same program. If you received a bad
disk from a vendor, the vendor should replace it.

   SUPPORT: This software has been diligently tested, and complete
instructions are contained in this user's manual.
   To contact us by mail, write to R.K. West Consulting, PO Box 8059,
Mission Hills, CA 91346, USA. We appreciate receiving a self-addressed,
stamped envelope with your mailed inquiry.
   Contact us by fax at 818-366-1737. Remember to include a return fax
number.
   Contact us by email at [e-mail].
   Visit our WWW home page at http://www.rosemarywest.com
   Support by mail, email, fax and online is FREE. We reserve the right to
limit support to users whose needs ar excessive or who have system problems
or personal difficulties which transcend the scope of the software.
   For a recorded information message, call 818-363-3966.

   Contact information was up to date as of December 1997.

   SOFTWARE LICENSE AND WARRANTY INFORMATION: See the file VENDINFO.DIZ.
If VENDINFO.DIZ is missing or damaged, or if you do not understand it,
contact the author for complete information.

   SITE LICENSING: A site license is an inexpensive way for more than
one person to legally use one copy of a program on more than one computer
at a time. Site licenses are designed for companies, offices or workgroups
where more than one person in the organization needs to use a product, but
does not need additional manuals or disks. Site licensing enables
companies, departments, government agencies, etc., to equip their personnel
with the tools they need at a minimal cost.
   Here's the gist of how it works:  The company purchasing a site license
(the licensee) provides a single point of contact for shipping, technical
support, upgrades, etc., and we (the licensor) provide "golden masters" of
the diskettes, manuals, and any other parts of the package.
   The following chart gives a breakdown of the cost of site licensing and
how much you save per site licensed. For instance, if the normal
registration
fee for one copy of the software was $29.00, and you purchased a site
license for 11 users (sites) your cost would be $377.30, which saves you
$161.70 of the cost of 11 separate purchases. The more sites you license,
the more you save.

SAMPLE SITE LICENSING CHART FOR A PROGRAM WITH A $29.00 REGISTRATION PRICE:

                     Discount      Price Per      Savings
     Quantity       Percentage       Unit         Per Unit

      5 -  10          25%          $21.75         $ 7.25
     11 -  15          30%          $20.30         $ 8.70
     16 -  20          33%          $19.43         $ 9.75
     21 -  25          36%          $18.56         $10.44
     26 -  30          39%          $17.69         $11.31
     31 -  40          42%          $16.82         $12.18
     41 -  50          45%          $15.95         $13.05
     51 -  60          48%          $15.08         $13.92
     61 -  70          51%          $14.21         $14.79
     71 -  80          54%          $13.34         $15.66
     81 -  90          57%          $12.47         $16.53
     91 - 100          60%          $11.60         $17.40

     101+           By special arrangement

   To obtain further information, please contact R.K. West
Consulting, PO Box 8059, Mission Hills CA 91346, USA; FAX [phone];
Email [e-mail].

   EVALUATION: Many software developers choose marketing methods which
allow copyrighted programs to circulate among users for purposes of
evaluation. This gives you the option to "Try Before You Buy". Using this
system, the author of a program typically allows you to try the program for
up to 30 days before payment is required. The exact terms of evaluation
vary from author to author, so be sure to check the documentation of the
programs you evaluate.
   Any fee you pay to a disk vendor is simply a distribution fee, and does
not cover the cost of the program itself. Disk vendors are required to
inform customers of these facts. Programs which are used beyond
the author's prescribed evaluation period require separate payment to the
author. By making payment to the author you obtain a legal right to use the
software, and encourage the continued development of quality software
for this type of marketing.
   The process of paying for the software is often called "registration".
The exact benefits of registration vary from author to author, but many
authors will offer one or more of the following: a current version,
technical support, a printed manual, free or discounted upgrades, bonus
utilities or special offers. Consult the registration information included
with each program for specific details.

   REGISTRATION: When you pay for CREATIVITY PACKAGE, you will receive:

   * A copy of the most recent version of the program, without any
     payment reminders.
   * A printed, indexed manual.
   * A license to continue using the program.
   * Technical support by fax, mail, email, and online.
   * One free bonus program as listed on the registration form.
   * Notice of upgrades, new releases, and new products.
   * Discounts on upgrades and other products.

                            CREATIVITY PACKAGE ORDER FORM

Your Name: _________________________________________  Please include your
                                                      phone number in case
Address: ___________________________________________  we have a question
                                                      about your order. We
         ___________________________________________  will not call for
                                                      any other reason. We
         ___________________________________________  do not sell our
                                                      mailing list. Phone
         ___________________________________________  numbers are required
                                                      for credit card
Phone:   ___________________________________________  orders.

_____ Registered versions @ $29.00 each:                 _________________

_____ Shipping to Canada $3.00
      Shipping outside North America $6.00               _________________

Disk size ____3.5" (preferred)  ____5.25"        TOTAL:  _________________

You will receive one FREE bonus disk with your order. Identity of bonus
disks changes from time to time, based on availability.

All prices are in U.S. dollars, checks drawn on and payable through a U.S.
bank. Canadian postal money orders in U.S. dollars are also acceptable. We
regret we cannot process payments drawn on non-U.S. banks. The most con-
venient way for overseas customers to order is by credit card (or U.S.
currency by registered mail).

Tell us where you found this program! ____________________________________

  ________________________________________________________________________

IF PAYING BY CHECK OR MONEY ORDER:           Please, do not send checks
                                             to Public Software Library,
  R.K. West Consulting                       and do not send credit card
  PO Box 8059                                orders to R.K. West.
  Mission Hills CA 91346
  USA

IF PAYING BY CREDIT CARD:
                                  Phone in USA: 800-242-4775
Public Software  Library          Phone Int'l: [phone]
PO Box 35705                      Fax: [phone]
Houston TX 77235                  Email: [e-mail]

These phone numbers are for ORDERS ONLY! The operators cannot answer any
questions about anything! If you need information or help, including
questions about an order you have placed, please contact R.K. West.

___Visa  ___MasterCard  ___Discover  ___American Express

Card Number: _____________________________________  Exp. Date: ____________

Name EXACTLY as shown on card: ____________________________________________

Signature: ________________________________________________________________